In the latter half of the 1980s, the 2WD buggy that gained popularity along with hot shots is re-appearing. The simple and slim body that imaged the actual racing buggy is made of polycarbonate. The rear is an independent type. Equipped with polycarbonate wings. Coloring follows the image of the time. In addition, the cockpit reproduces the driver doll and gives a good feeling of running. Furthermore, the gold-plated wheels produce the feet. The front is ribbed. You can enjoy off-road driving with oval block tires on the pattern and rear.

[Rear wheel drive chassis updated according to the current RC scene] A highly dustproof monocock frame with RC mechanism inside and The basic configuration, such as the double wishbone 4 German suspension with a monoshock on the front, has been inherited as it is and updated according to the current RC scene. First, the drive shaft has been changed to a dogbone type. Equipped with a stabilizer to suppress excessive roll. A total of 8 ball bearings are standard equipment inside the sealed gearbox and the rear upright to minimize drive loss.

Specifications
●Length: 425mm ●Height: 133mm ●Width: 225mm ●Weight: 1,140g (Not including R/C equipment and battery pack) ●Wheelbase: 260mm ●Tread: 198mm (Front), 183mm (Rear) ●Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear) ●ABS Resin Monocoque Frame ●Rear-Wheel 2WD ●3-Bevel Differentials ●4-Wheel Double Wishbone Suspension ●CVA Oil Dampers x3 (Front & Rear Total) ●Gear Ratio= 8.7:1, 7.25:1 ●Type 540 Motor

• Requires: 2-channel radio, Electronic Speed Control (ESC) , steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

Assembly Required

Overall length = 425 mm The photo shows the kit assembled and painted.

• 

  Monoshock type front double wishbone suspension. Stabilizer to prevent roll is standard equipment.

• 

  Rear double wishbone suspension with two CVA dampers arranged almost vertically. The drive shaft uses a highly reliable dog bone type.

• 

  The monocoque frame with the RC mechanism inside has a slim shape and is strong enough.