HKS " NEW " SPORTS OIL FILTER M20 Thread
NEW REDESIGNED / IMPROVED BLACK OIL FILTER
Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance.
HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines.
It is recommended to replace a filter every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace a filterevery 3,000 km - 5,000km.
φ65 x H50 is newly released. This new size filter is available for the latest Kei cars and vehicle equipped with an oil cooler that needs a low height filter. (A sandwich type attachment is required to install HKS Oil Filter.)
This oil filter fits the following models
MAZDA
RX7 Series 6 &7 FD3
RX7 FC
RX8
MX5 1989-2005
NISSAN
GTR R35
350Z Z33 & Z34 models
250 300 350GT Skyline VQ25 VQ30 VQ35
STAGEA M35 VQ25 VQ30 VQ35 Inc Turbo
Silvia S14 & S15
TIIDA 2004 ON
NC11 , C11
HR15DE Engine
SUBARU
Impreza 1992-2010 (inc STi & WRX)
GRF , GRB , GH8 , GDB , GDA , GC8 , GF8 , GGA , GGB ( EJ20 EJ22 EJ25 turbo & non turbo)
Legacy 1998-2010
BM9 , BL5 , BE5 , BR9 , BP5 , BH5
Forester 1998-2010
SF , SH5 , SG9 , SG5
MITSUBISHI
Evo Lancer 1992-2010
CD9A, CE9A, CN9A, CP9A, CT9A, CZ4A
(EVO1-10)
Colt 2002-2010 ( inc the Ralliart version)
Z23, Z24, Z25, Z26, Z27, Z28
Installation to a vehicle which does not meet the above conditions may result in engine damage due to leakage of oil.
Diameter of Oil Filter Screw
| Pitch (mm) |
External diameter (mm) |
Root dia. (mm) |
Effective dia. (mm) |
Crest angle | Using Maker | |
|---|---|---|---|---|---|---|
| UNF3/4-16 | 1.5875 | 19.011 | 17.063 | 18.019 | 60° | Toyota, NIssan, Suzuki, Daihatsu |
| M20 P=1.5 | 1.500 | 20.000 | 18.376 | 19.026 | 60° | Nissan, Honda, Mitsubishi, Mazda |
- Make sure to select a proper oil filter screw size. Since both screw sizes are very close, M20 filter fits on UNF center bolt. If improper screw size is selected, it may cause the leakage of oil.
- What is UNF screw?
It is a triangular thread form by inch in the ISO standard. The thread angle is 60 degrees. It is classified by the suffix "UN".
The type of screw is described by a pitch as "Coarse" (UNC), "Fine" (UNF), "Extra fine" (UNEF). There is also one for aerospace equipment (UNJ). In Japan, use of this screw type is limited only for aircraft and automobiles, but it is widely used in the United States.
JIS employs only coarse (UNC) and fine(UNF) pitches.
This screw was initially designed for the millitary needs by the United States, the UK, and Canada.
