FUTABA S-U300 STANDARD SIZE SERVO 4.1kg/cm, 0.19 Sec
FEATURES
- Powerful S.BUS2 digital servo with plastic gearbox
- Low-wear potentiometer
- Robust plastic housing
- High resolution
- High positioning accuracy
Programmable by S.BUS2 technology. Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in various ways:
1. with the handy programmer SBC-1
2. at the PC with the USB adapter CIU-3
3. at the S.BUS connection of the transmitter
The following parameters can be set:
- S.BUS channel assignment
- servo reversal
- Servotype (Normal / retractable)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (on / off)
- Servo position (servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39 - 9 seconds per 45 degrees
- Setting the Deadband (Deadband)
- Servo travel adjustment left and right separated, approx. 50 - 175%
- starting force
- attenuation
- holding force
- ID storage
Specification:
- Torque (4.8V): 3.2kg-cm
- Torque (6.0V): 4.1kg-cm
- Speed: 0.23s (4.8V), 0.19s (6.0V)
- Operating voltage: 4.8 – 6.0V
- Working frequency: 50 – 70Hz
- Weight: 36g
- Size: 40.4 x 19.8 x 36mm
- 25T Spline