Enhance Your Street and Track Experience with BC Racing BR Series Coilovers.

BC Racing's BR series coilovers are the perfect choice for your street and occasional track needs. The coilovers boast a 46mm diameter piston within a 53mm diameter damper body that maximizes the oil capacity.

As the damper unit works, the oil contained within heats up, causing changes in the damping characteristics of the unit due to viscosity changes. While BC Racing only uses high-quality oil for their coilovers, they take it a step further with the BR range by featuring a large 53mm diameter damper body. This increase in capacity reduces the peak temperature, significantly enhancing damper performance.

The BR Design offers a wide range of damping adjustment with 30 levels of compression/rebound which is adjusted simultaneously. This combined with full length height adjustment makes the BR Design a very affordable coilover system without sacrificing handling, comfort levels or build quality.

** RACE USE ONLY - This set requires the Strut to be welded on to the factory Stub axle and or spindle/ Clevis . NZTA insists on welds being Xray / Crack / Load tested if wanting to use on NZ public roads via LVVTA certification .  Our Clients have found the testing procedures to be irregular therfore we list these as RACE USE ONLY . Absolutely No returns unless faultly therein will be repaired  ** 

To Suite TOYOTA AE86 SPRINTER AE85 COROLLA 1983- 1987 

Model Specs - Pillowball camber fronts With WELDED STUB AXLES  - Solid Rears 

Spring rate on the front is 8kg and 6kg Rear 

- Height Adjustment Via Shock Body Not Spring
- 30-clicks of simultaneous damping adjustment (compression/rebound)
- Enlarged Cylinder & Newly Developed Piston
- Exclusively Designed for Each Application
- Anodized Alloy Casing
- CNC Machined
- T6061 Alloy Locking Ring
- SAE9254 Steel Racing Springs
- Monotube Design For Maximum Performance
- Fully Rebuildable
- 12 Month Warranty

Disclaimer: Please note that operational noises such as knocks and squeaks from track-oriented products such as pillow ball top mounts and track-oriented coilovers such as the DS, RM, ER, HM or ZR models is a normal characteristic and  NOT covered by warranty.

May Not be Actual Model Shown In Photo 

* Supplied Spring Rates may differ from advertised  

** Please note that not all vehicles use camber plates in the front and/or rear. Some vehicles reuse OEM upper mounts.